ITEMS FOR SALE
|
| APPLICATION IN WATER - Bilge Pump Kit | |
|
Recommended for amphibious use of any ARGO. Operated by a dash mounted switch, the pump quickly removes water from the lower body. |
|
| APPLICATION IN WATER - Outboard Bracket (Avenger) | |
|
This one piece bracket mounts at the bumper and onto the trailer hitch bracket, mounting location is slightly off center allowing use of the 695-80BL amphibious trailer. Accepts an out board motor of up to 9.9 hp for increased propulsion in water |
|
| APPLICATION IN WATER - Outboard Bracket (wood) | |
|
Accepts electric or gasoline motors up to 9.9 hp. Combined installation of bracket and support is essential. |
|
| APPLICATION IN WATER - Outboard Side Bracket | |
|
Mounts the outboard to the side so the 4-wheel amphibious trailer can also be towed in water while using the outboard for propulsion. |
|
| APPLICATION IN WATER - Outboard Support (steel) | |
|
Supports the long tail shaft outboard. Vanguard models require trailer hitch kit to install this support. Combined installation of bracket and support is essential. |
|
| COMFORT - Brake/Tail Light Kit | |
|
This kit is comprised of two "JW Speaker" Brake/Tail lights ; the kit comes with wire harness and all necessary mounting hardware. |
|
| COMFORT - Cargo Tie Down Kit | |
|
Six rings mount around the rear compartment. |
|
| COMFORT - Convertable Top | |
|
Protects the occupants from the weather. Has removable side and rear doors and stores folded down with boot cover. Requires windshield. |
|
| COMFORT - Dual Tail Light Kit | |
|
Red lamps illuminate with light switch on |
|
| COMFORT - Handrail Kit | |
|
Tubular steel rails mount around the body, providing hand-hold points for rear passengers. |
|
| COMFORT - Heater Kit | |
|
Automotive style hot coolant heater with 2 speed fan to defrost windshield and heat passenger compartment for use in Avenger and Conquest models. |
|
| COMFORT - Mounting Kit (Brushguard/Winch) | |
|
For additional support of optional brushguard. |
|
| COMFORT - Power Winch Kit | |
|
For vehicle recovery or to raise lower plow blade. 3000 lbs.(1364 kg) capacity, reversing with free wheeling out, 40 ft.(12 m) steel cable with 30 ft.(9 m) nylon strap. Safety switch disables winch unless ignition is on. The mounting kit is included. |
|
| COMFORT - Power Winch Kit (Avenger) | |
|
3000 lbs.(1364 kg) capacity, reversing with free wheeling out, 40 ft.(12 m) steel cable with 30 ft.(9 m) nylon strap. Convenient ‘quick remove’ bracket allows winch to be removed or locked to the vehicle for added security. It can be used with the optional rear receiver winch kit. It also features a handlebar mounted toggle switch to control winch operation including raising and lowering the 657-21 Avenger snow plow. |
|
| COMFORT - Rear Bench Seat Kit | |
|
Removable bench seat with back rest for the rear compartment of any eight wheel model. |
|
| COMFORT - Rear Bench Seat Kit (Avenger) | |
|
The Avenger rear bench seat features versatile forward or rear facing position for easy entry / exit when the vehicle is equipped with a convertible top. The seat's comfort is improved due to the greater thickness and density of the grade of foam used. |
|
| COMFORT - Rear Receiver Winch Kit | |
|
This bracket mounts into the Avenger trailer hitch receiver, extending the versatility of your winch kit just in case you need more flexibility. Kit comes complete with instructions and wire harness for installation |
|
| COMFORT - Remote Control Kit - Wireless | |
|
Wireless and compact this unit can control remote use of winch from a location of up to 150' for added convenience and versatility |
|
| COMFORT - Remote Control Kit (Winch) | |
|
Winch pistol grip hand control with 12 ft./ 3.6 metre wire lead that plugs into the winch solenoid and enables the operator to control the winch while standing away from the vehicle. |
|
| COMFORT - Tow Hook Kit | |
|
An attachment point for front or rear. |
|
| COMFORT - Utility Storage Pouch | |
|
Domes attach to back rest for convenient, extra storage space. |
|
| COMFORT - Windshield (Fold-Down) | |
|
Laminated safety glass in an aluminum frame features mounting hole for the optional windshield wiper kit. |
|
| COMFORT - Windshield Wiper Kit | |
|
Comes with everything needed to assemble and fit to your ARGO Fold-down Windshield. The Wiper Motor mounts quickly and easily, requiring no drilling on newer style predrilled windshields. |
|
| CONVENIENCE - Alternator Kit | |
|
This accessory kit replaces the existing charging system. Allows the operator to use accessory items with heavy electrical load (powered dump box, heater kit, frequent use of power winch etc.). |
|
| CONVENIENCE - Dump Box (Manual & Powered) | |
|
The manual dump box improves the load carrying versatility of the ARGO 8-wheel models. The powered dump box improves the load carrying versatility of the ARGO 8-wheel models. |
|
| CONVENIENCE - Roll Bar Light Kit | |
|
This kit features 2 rubber mounted, shock resistant 3"x 5" weather proof lamps that are easily installed to your existing roll bar kit (cannot be used with convertible top). |
|
| CONVENIENCE - Snow Plow | |
|
81 in.(2 m) wide steel blade for straight or angle use. Attaches to front bearing extension housings. Requires power winch. |
|
| CONVENIENCE - Trailer Hitch Kit | |
|
Vanguard models require this kit for the use of the 4-wheel amphibious trailer and for the installation of the outboard motor support. |
|
| CONVENIENCE - Trailer Kit | |
|
600 Ib.(270 kg.) carrying capacity in a black 6-wheel lower body with ARGO axles and wheels. |
|
| CONVENIENCE - Utility Bracket Kit | |
|
Consists of two "Rugged Gear" utility hooks and barrel holder. It is an ideal way to safely secure objects such as shovels, fishing rods, paddles etc. to the outside or inside your ARGO. |
|
| CONVENIENCE - Utility Rack Kit | |
|
Is comprised of two formed flatbar brackets, four "Rugged Gear" utility hooks and all necessary hardware to attach the bracket to the backrest handrail and upper body. This rack kit allows 2 rifles or shotguns to be carried on the inside of the vehicle. |
|
| PROTECTION - Avenger Bushguard Kit | |
|
Protects the winch and headlights from damage by the brush encountered along the trail. The Avenger Brushguard features an integrated tow hook (model shown). Installation of mounting kit or power winch kit is required. |
|
| PROTECTION - Roll Bar Kit | |
|
Adds distinctive look and protection to driver and passenger. Comes with 2 seat belts and fits all 6-wheel models. |
|
| PROTECTION - Roll Over Protection Structure (ROPS) | |
|
Powder coated tubular steel frame provides roll-over protection and 2 seat belts for driver and front seat passenger. |
|
| PROTECTION - ROPS & Rear Bench Seat Kit | |
|
Protects the driver, front seat passenger and two rear passengers by using the roll over protection structure. Includes rear bench and 4 seat belts. |
|
| PROTECTION - Skid Plate Kit | |
|
Formed from black polyethylene to protect the power body. |
|
| PROTECTION - Storage Cover | |
|
Black weather-tight material secures in place under Argo bumper. |
|
| TRACKS - Rubber Track Kit | |
|
Light weight and durable construction, combined with low rolling resistance to ensure smooth quiet operation in most difficult terrain conditions. The 18" track width ensures optimum floatation and minimal ground pressure while the tread design offers exceptional traction on various hard and soft surfaces. |
|
| TRACKS - Standard Track Kit | |
|
13 Inch (32.5 cm) wide segments go over Runamuk tires, reducing ground pressure for travel over snow or march. |
|
| TRACKS - Super Track Ice Cleat Kit | |
|
Steel cleats increase traction on ice and hard packed snow. |
 |
| TRACKS - Super Track Kit | |
|
18 inch (45.5 cm) wide segments go over Runamuk tires, providing optimum floatation over deep snow. |
 |